Accessories for Liquid Level Indicators

Indicator Pointers

A large round "red" indicator for easy-to-read liquid levels from long distances. This indicator moves freely up and down on the Liquid Indicator Scale for precise readings.

Top Anchor

A top anchor is available for mounting on flat tank surfaces, 5 degree pitch for cone roof tanks and 20 degree pitch for exaggerated slope roofs.

Liquid Level Float

All 316 stainless steel housing, hardware, and eyelets. 2 piece design spot welded together and filled with a proprietary, unsinkable, and nearly indestructible high density foam. Approximately, 16lbs. and 17” wide. Guide wire eyelets 20” on center.

Gas Tight Oil Seal

Made of A-356 aluminum casting with all stainless steel trim and high temperature pulley wheels (400º+) for the prevention of H2S gases and other toxic vapors from escaping into the atmosphere.

90 Degree Elbow

A precision machined elbow made of A-356 aluminum with all stainless steel trim. The high temperature wheel assembly, (as shown) is pre-mounted in the elbow.

Tank Gauge Brackets

These mounting brackets are especially designed to accommodate bolted or welded tank adjustments and extensions to allow the indicator to clear truss or insulated tanks.

A stainless steel bolt-on adjustable bracket with slotted holes to allow for minor extensive adjustments to clear truss or insulation on tanks.
A stainless steel bolt-on bracket with slotted holes for normal installation.
A weld-on adjustable bracket with slotted holes for normal installations.